Product Details

Your Name

Recipients Email

Message

MSDS

Betco Ax-It Plus No-Rinse Stripper

Concentrate - 640 fl oz (20 quart) - 1 Each - Low Foaming, Rinse-free, Fast Acting, Versatile, Pleasant Scent, Residue-free - Clear, Amber

Versatile - use in a range of dilution ratios depending on the job
Aggressive, fast-acting solution resolves stripping difficulties like excessive buildup
Saves time and effort with no rinsing
Use on hard-surface floors and all types of resilient flooring
Will not streak, puddle or fish eye

Item: BET154B500
Manufacturer: Betco CorporationView similar

General Information
Marketing Information	This fast-acting floor finish liquefier will solve stripping difficulties caused by frequent high-speed burnishing, super-hard urethane fortified finishes or excessive buildup. It is designed to remove layers of floor finish in less time with less effort and no rinsing. Floors are ready to re-coat without neutralizing when used as directed. Use on hard-surface floors in a range of dilution ratios to do the job. Low-foaming formula is recommended for removing water-based acrylic floor finishes for all types of resilient tile and hard surfaces. Ax-it Plus is not recommended for stripping linoleum or sheet vinyl floors.
Product Line	Ax-It Plus
Product Name	Ax-It Plus No-Rinse Stripper
Product Type	Floor Stripper
Manufacturer	Betco Corporation
Manufacturer Website Address	http://www.betco.com
Packaged Quantity	1 Each
Manufacturer Part Number	154B500
Brand Name	Betco

Product Information
Cleaner Volume	640 fl oz (20 quart)
Features	Low Foaming Rinse-free Fast Acting Versatile Pleasant Scent Residue-free
Cleaner Type	Concentrate
Application/Usage	Floor Hard Floor Tile Hard Surface
Ph	13.5 - 14
Composition	Water Butoxyethanol Potassium Hydroxide Ethanolamine Sodium Xylene Sulfonate Tetrapotassium Pyrophosphate Tetrapotassium EDTA Fragrance Poly (oxy-1,2-ethanediyl) Phosphate
Cleaner Form	Liquid
Directions/Instructions	Recommended ESIor removing water-based acrylic floor finishes from all types of resilient tile and hard surfaces. Pre-test in a small area; color bleeding or discoloration may occur on linoleum, rubber tile or asphalt tile. Not recommended for stripping linoleum or sheet vinyl floors. Sweep or dust mop the floor to remove any large debris. Dilute with warm to hot water. For normal stripping, dilute 13 oz./gal. or 100 mL/L (1:10) of water. For heavy stripping, dilute 25 oz./gal. or 200 mL/L (1:5) of water. Apply solution liberally to floor surface. Allow a minimum of 5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low-speed rotary machine, automatic scrubber or stripping machine. Pick up the solution with a wet vacuum, an automatic scrubber or a mop and bucket and thoroughly rinse the floor. Allow floor to dry completely before applying finish or sealer. No flood rinsing is necessary if surface appears free of dust and residue. Please recycle empty container.

Physical Characteristics
Product Color	Clear Amber
Color Family	Dual Color

Note: cookies must be enabled.

Category:

Go To Favorites after added